Anadrol:
Highest concentration made – 50mg/ml
Per 1 gram of Oxymetholone you will need:
8.4 ml’s of PEG 300
10.5 ml’s 190 Proof Grain Alcohol

Anavar:
Highest concentration made – 20mg/ml
Per 1 gram of Oxandrolone powder you will need:
9.8 ml’s of PEG 300
39.2 ml’s of 190 Proof Grain Alcohol

Armidex:
Highest concentration made – 5mg/ml
Per 1 gram of Anastrozole powder you will need:
19.9 ml’s PEG 300
179.1 ml’s of 190 Proof Grain Alcohol

Clomid:
Highest concentration made – 50mg/ml
Per 1 gram of Clomiphene Citrate you will need:
8.4 ml’s of PEG 600
10.5 ml’s 190 Proof Grain Alcohol

Dianabol:
Highest concentration made – 50mg/ml
Per 1 gram of Methandrostenolone powder you will need:
19 ml’s of 190 Proof Grain Alcohol
No PEG needed. Follow the no PEG recipe.

Femara:
Highest concentration made – 5mg/ml
Per 1 gram of Letrozole powder you will need:
19.9 ml’s PEG 300
179.1 ml’s of 190 Proof Grain Alcohol

Nolvadex:
Highest concentration made – 20mg/ml
Per 1 gram of Tamoxifen Citrate you will need:
9.8 ml’s of PEG 600
39.2 ml’s of 190 Proof Grain Alcohol

Proviron:
Highest concentration made – 50mg/ml
Per 1 gram of Mesterolone you will need:
8.4 ml’s of PEG 300
10.5 ml’s 190 Proof Grain Alcohol

Winstrol:
Highest concentration made – 25 mg/ml
Per 1 gram of Stanzolol you will need:
7.8 ml’s of PEG 300
31.2 ml’s of 190 Proof Grain Alcohol

—————————————————————————

Solutions requiring PEG and 190 Proof Alcohol

Step 1. Prepare a hot water bath. Boil water in microwave or on a pot. Once boiling starts remove from heat.

Step 2. Place PEG and powder in beaker.

Step 3. Place the beaker deep enough in to the water so that the hot water is level with the PEG and powder. Gently swirl or stir with a stir rod until solution is clear. Reheat water as needed.

Step 4. Allow PEG to cool some. Then add in your 190 proof alcohol. You don’t have to do this drop by drop but don’t just dump it in. Pour it in slowly.

Step 5. Stir or gently shake until mixed.

For recipes that do not require PEG.

  1. Mix powder and 190 proof alcohol.
  2. Stir with stir rod or shake. Most powders that do not require PEG will disolve no problem. If heat is needed follow the instructions for heating powders that use PEG.

—Landmark Elite Team

Leave a Reply